Kval MLX Page 28 Operation And Service Manual Download

Page: 28 / 144

How to Download the Service Application

KVAL MLX Operation/Service Manual

1-18

The interface of the

Kval Support App

will be dis

played. Enter your name in the

Your Name

field.

The fields are described below:

Session code: An internal number to track this

machine. It is auto filled.

Allow Remote Control: Program is ready to allow

technicians to access machine computer

Your Name Field: Enter your name. The Kval techni

cian will use this field to identify this machine.

Description: Enter machine Serial number and

issue.
Indicator: Green indicates there is a good connection

to the service center. If red, there could be an issue

with a LAN connection. Check the connections in the

plant.

After the

Kval Support App

is loaded

and completed, call the Kval service

center(1-800-553-5825) and have

the technician connect to the

machine computer.

Click the

Allow

button to give the

Kval

service technician permission

to access the operator station.

We are now ready to troubleshoot.

Summary of Contents for MLX

















































































































































Search results

Summary of Contents for MLX

Reviews:

Related manuals for MLX

Brands by name

Popular brands

Kval MLX, Operation And Service Manual

Search results

Summary of Contents for MLX

Reviews:

Related manuals for MLX

Brands by name

Popular brands