Kubota Z751KWi, Operator'S Manual

Page: 56 / 102

• Do not place your body under the machine or
the mower deck while lifting the machine.
• Park the machine on a firm and level surface.
• Apply the parking brake.
• Stop the engine and remove the key before
removing the front caster wheels.
(1) Lock nut
(2) Wheel bolt
(3) Yoke
(4) Dust cover
1. Lift the front of the machine with a safe lifting
device.
2. Remove the lock nut with nylon sleeve and the
wheel bolt.
3. Remove the wheel and dust covers from the yoke
assembly.
2. Installing the front caster wheels
WARNING
To avoid serious injury or death:
• Do not place your body under the machine or
the mower deck while lifting the machine.
• Park the machine on a firm and level surface.
• Apply the parking brake.
• Stop the engine and remove the key before
removing the front caster wheels.
(1) Lock nut
(2) Wheel bolt
(3) Yoke
(4) Dust cover
1. Install the replacement wheel and dust covers.
2. Install the wheel bolt and the lock nut with nylon
sleeve.
3. Tighten the nut.
4. After installing, add grease to the grease fittings.
IMPORTANT :
• Insert the wheel bolt from the outside of the
yoke.
• Tighten the nut gradually until the wheel
bearing play is eliminated and the wheel
turns freely by hand.
Tightening torque
20 to 25 N ⋅ m
14.8 to 18.4 lbf
⋅
ft
2 to 2.5 kgf ⋅ m
5. Lower the machine.
WHEELS TIRES AND WHEELS
Z751KWi,Z781KWi,Z781KWTi
51