8. Greasing
WARNING
To avoid serious injury or death:
• Be sure to stop the engine and remove the key
before greasing.
1. Apply a small amount of multipurpose grease to the
following points every 100 hours.
If you operated the machine in extremely wet and
muddy conditions, lubricate grease fittings more
often.
(1) Center mower link bushing
(1) Front mower link bushing (LH, RH)
(2) Rear mower link bushing (LH, RH)
(1) Mower belt tension pivot
9. Checking the spark plug condition
and gap
WARNING
To avoid serious injury or death:
• Park the machine on a firm and level surface.
• Apply the parking brake.
• Stop the engine and remove the key before
checking the spark plug.
Remove the spark plugs, check condition, and reset the
gap or replace with new plugs as necessary.
1. Before removing spark plugs, clean the area around
the base of the plug to keep dirt and debris out of
the engine.
2. Disconnect the spark plug cap from spark plugs.
3. Use a spark plug wrench to remove the spark
plugs.
4. Remove plugs and check its condition.
Replace the plug if worn or reuse is questionable.
PERIODIC SERVICE
EVERY 100 HOURS
70
Z751KWi,Z781KWi,Z781KWTi
Summary of Contents for Z751KWi
