Kubota Z751KWi, Operator'S Manual

Page: 31 / 102

14. Attach the mower belt to the mower pulleys. Refer
to the routing label.
IMPORTANT :
• The belt between the idler pulley and PTO
clutch pulley should be to the left of pin-1 as
shown in figure A, and to the left of the PTO
clutch guide as shown in figure B.
• The belt between the tension pulley and the
PTO clutch pulley must be to the left of pin-2
as shown in figure A, and to the right of
pin-3 as shown in figure B.
(1) Mower belt
(2) PTO clutch pulley (A) Mower tension arm area
(B) PTO clutch area
Figure A
(3) Pin-1
(4) Pin-2
(5) Tension pulley
(6) Idler pulley
(7) Belt between the idler pulley and PTO clutch pulley
(8) Belt between the tension pulley and the PTO clutch pulley
Figure B
(7) Belt between the idler pulley and PTO clutch pulley
(8) Belt between the tension pulley and the PTO clutch pulley
(9) PTO clutch pulley
(10) PTO clutch guide
(11) Pin-3
15. After mounting the mower, check the mower level. If
necessary, adjust the mower level and anti-scalp
rollers.
ADJUSTING THE MOWER
(See OPERATING THE MOWER on page 46 and
ADJUSTMENT on page 80.)
DISMOUNTING THE MOWER
DECK
WARNING
To avoid serious injury or death:
• Push the mower deck lift pedal with enough
force. If the force on the mower deck lift pedal
in step 6 is not sufficient, the mower link will
come loose suddenly when the 14 mm (0.55 in.)
shaft is removed.
Be sure to push the lift pedal with sufficient
force to prevent this sudden movement.
• Keep all hands and feet clear of the mower links
when removing the shaft.
MOWER MOUNTING ADJUSTING THE MOWER
26
Z751KWi,Z781KWi,Z781KWTi