Kubota Z751KWi, Operator'S Manual

Page: 97 / 102

MACHINE TROUBLESHOOTING
Symptom (if) Cause Remedy
The machine operation is not
smooth. • The hydrostatic transaxle fluid is insufficient. • Fill with oil.
• The filter is clogged. • Replace the filter.
• Transaxle bypass lever is activated. • Deactivate bypass lever.
The machine does not move
while the engine is running. • The parking brake is on. • Release the parking brake.
• The transaxle fluid level is insufficient. • Fill with oil.
• Transaxle bypass lever is activated. • Deactivate bypass lever.
The machine moves when the
motion control levers are in the
“NEUTRAL LOCK” position (op-
erating the engine).
• The hydrostatic lever linkage is not correctly
adjusted. • Ask your dealer for hydrostatic lever linkage
adjustment.
• The control linkage pivots are sticking. • Pull up and lubricate linkage.
Master system warning lamp
flashes. • Fuel sensor is disconnected. • Check wire harness.
• Coolant temperature sensor is disconnected. • Check wire harness.
• LCD monitor malfunction. • Replace LCD monitor.
Transaxle belt is slipping. • Weak tension spring • Replace the tension spring.
• Worn transaxle belt • Replace the transaxle belt.
If you have any questions, contact your local KUBOTA Dealer.
TROUBLESHOOTING MACHINE TROUBLESHOOTING
92
Z751KWi,Z781KWi,Z781KWTi