Kubota Z751KWi, Operator'S Manual

Page: 39 / 102

For example, the key is in the “ON” position but the
engine does not start.
(1) PTO switch (A) “DISENGAGED” (OFF)
The parking brake is applied but the [RH] light is not
green. Check the motion control lever (RH).
(1) Parking brake lock pedal
(2) Parking brake pedal
(3) Motion control levers
The motion control levers have been set to the
“NEUTRAL LOCK” position. The lights are now all
green and the engine may be cranked.
6. Power usage and fuel economy
monitor
This machine has 2 modes of operation.
(1) Power usage monitoring mode
(2) Fuel economy monitoring mode
6.1 Fuel economy monitoring mode
The gauge is full when the machine is very fuel
efficient.
When the gauge is full, you are getting maximal hours
of usage per gallon of fuel. (example: more than 1 hour
of usage per gallon of fuel)
The gauge is empty when the machine is not fuel
efficient. When the gauge is empty, you are getting
minimal hours of usage per gallon of fuel. (example:
less than 20 minutes of usage per gallon of fuel)
(1) Fuel economy monitoring mode
(2) Gauge
6.2 Power usage monitoring mode
The gauge is full when you are using all of the engine
power.
The gauge is empty when you are using very little
engine power.
OPERATING THE ENGINE LCD MONITOR
34
Z751KWi,Z781KWi,Z781KWTi