Kubota WSM L3560, Workshop Manual

Page: 100 / 801

GENERAL
L3560, L4060, L4760, L5060, L5460, L6060, WSM
G-71
Stopper Magnet Clutch (For A/C Compressor)
Application
• Use for loosen and tighten the magnet clutch mounting nut. (Use radius
C
).
NOTE
• This special tool is not available, so make it. Refer to the figure.
9Y1210824GEG0112US0
A
125 mm (4.92 in.)
H
4.52 rad (120 °)
B
40 mm dia. (1.57 in. dia.)
I
Radius 27 mm (Radius 1.06 in.)
C
Radius 33 mm (Radius 1.30 in.)
J
Radius 50 mm (Radius 1.97 in.)
D
16 mm (0.63 in.)
K
Weld all around
E
120 mm dia. (4.72 in. dia.)
L
20 mm (0.78 in.)
F
12 mm dia. (0.47 in. dia.)
M
Radius 41 mm (Radius 1.61 in.)
G
3 × M8 × 1.25 All screws
KiSC issued 03, 2016 A