Kubota WSM L3560, Workshop Manual

Page: 624 / 801

ELECTRICAL SYSTEM
L3560, L4060, L4760, L5060, L5460, L6060, WSM
9-M38
(7) Indicator Control
In this electronic instrument panel, the control of
various monitor lamps shown in figure are equipped in
addition to indicators.
(1) Parking Brake Indicator
If the parking brake is applied, parking brake switch
is turned on and monitor lamp will come on.
(2) H-DS (Hydro Dual Speed) High Range Speed
Indicator
If the H-DS lever is pushed up, the H-DS high speed
range indicator will come on.
(3) H-DS (Hydro Dual Speed) Low Range Speed
Indicator
If the H-DS lever is pushed down, the H-DS low
speed indicator will come on.
(4) Auto H-DS (Hydro Dual Speed) Indicator
If the Auto H-DS is chosen in the HST Mode, the
Auto H-DS indicator will come on.
(5) ATA (Auto Throttle Advance) Indicator
If the ATA switch is pushed, ATA indicator come on.
(6) Stall Guard Indicator
If the Stall Guard is chosen in the HST Mode, the
Stall Guard indicator will come on.
(7) Cruise Control Indicator
The cruise control indicator stays on while the tractor
is running under cruise control.
(8) Rear PTO Indicator
If the PTO system gets engaged (
ON
), the indicator
light up.
(9) High Beam Indicator
If the head light switch is turned to High beam
position, the indicator lamp comes on.
(10)Glow Indicator
If the main switch is turned to
"ON"
position, the
glow indicator lamp comes on, and goes off
automatically when preheating is completed.
9Y1210824ELM0064US0
(1) Parking Brake Indicator
(2) H-DS (Hydro Dual Speed)
High Range Speed Indicator
(3) H-DS (Hydro Dual Speed)
Row Range Speed Indicator
(4) Auto H-DS (Hydro Dual
Speed) Indicator
(5) ATA (Auto Throttle Advance)
Indicator
(6) Stall Guard Indicator
(7) Cruise Control Indicator
(8) Rear PTO Indicator
(9) High Beam Indicator
(10) Glow Indicator
KiSC issued 03, 2016 A