Kubota WSM L3560, Workshop Manual

Page: 611 / 801

ELECTRICAL SYSTEM
L3560, L4060, L4760, L5060, L5460, L6060, WSM
9-M25
Swashplate Position Sensor : For HST
The swashplate position sensor is located above the
regulating valve.
The sensor is linked with the servo piston.
If the servo piston moves (if swashplate is inclined),
the sensor detects its position and signals are sent to the
ECU.
9Y1210824ELM0037US0
HST Range Gear Shift Lever Sensor: For HST
This sensor (1) is designed to detect the position at
which the HST range gear shift lever changes the speed,
and is mounted at the bottom of the lever.
It has the variable resistor of revolution angle type,
and the maximum resistance value is approximately
5.4 kΩ. It outputs the lever position of
L
,
M
,
N
or
H
in the
range of approximately 0.3 to 4.6 V.
9Y1210824ELM0038US0
HST Pedal Sensor: For HST
The HST pedal sensor is located on the right of the
HST pedal. When the HST pedal is operated, signals are
sent to the ECU.
9Y1210824ELM0039US0
(5) Others
Glow Relay
This tractor has a system in which glow control
controls the coil current that starts or stops the
preheating circuit.
The time required for preheating is adjusted by
means of the coolant temperature sensor.
9Y1210824ELM0040US0
(1) Swashplate Position Sensor
(1) HST Range Gear Shift Lever
Sensor
(1) HST Pedal Sensor
(1) Glow Relay
KiSC issued 03, 2016 A