Kubota WSM L3560, Workshop Manual

Page: 605 / 801

ELECTRICAL SYSTEM
L3560, L4060, L4760, L5060, L5460, L6060, WSM
9-M19
(3) Switches
Main Switch
The main switch (1) transmits a main switch
"ON"
signal and an
"ST"
signal at the time of engine start to
the electronic instrument panel. When each lever switch
and the associated are in the neutral position, the
computer in the electronic instrument panel detects the
signals and determines whether the engine can be
started safety.
9Y1210824ELM0013US0
Engine Oil Pressure Switch
This switch (1) is turned on when the main switch is
turned on and the engine oil pressure becomes lower
than 50 kPa (0.5 kgf/cm
2
, 7 psi), and sends a signal to
light up the alarm lamp.
9Y1210824ELM0014US0
PTO Switch
This switch (1) is mounted on the right cover, sends
a 12 V signal to light up the lamp at the electronic
instrument panel when PTO is used. It also serves as a
safety switch when the engine is started.
9Y1210824ELM0015US0
Multi Function Combination Lever (Turn Signal and
Head Light Switch)
The multi function combination lever is located on
the right of the steering handle.
The head light (low beam) is turned on by turning the
lever clockwise from the
"OFF"
position.
The head light (high beam) is turned on by turning
the lever clockwise from low beam position.
When the lever is pushed up, the left-side light
blinks. When the lever is pushed down, the right-side
light blinks.
9Y1210824ELM0016US0
(1) Main Switch
(1) Engine Oil Pressure Switch
(1) PTO Switch
(1) Head Light Switch (2) Turn Signal Switch
KiSC issued 03, 2016 A