Kubota WSM L3560, Workshop Manual

Page: 104 / 801

GENERAL
L3560, L4060, L4760, L5060, L5460, L6060, WSM
G-75
NOTE
• Wheels with beveled or tapered holes: Use the tapered side
of lug nut.
NOTE
• IND: for industrial
9Y1210824GEG0121US0
(2) Rear Wheel
Rear Wheels
Rear tread width can be adjusted as shown with the standard
equipped tires.
To change the tread width
1. Remove the wheel rim and / or disk mounting bolts.
2. Change the position of the rim and / or disk (right and left) to the
desired position, and tighten the bolts.
IMPORTANT
• Always attach wheels as shown in the drawings.
• If not attached as illustrated, transmission parts may be
damaged.
• When re-fitting or adjusting a wheel, tighten the bolts to the
following torques then recheck after driving the tractor 200
m (200 yards) and 10 times of shuttle movement by 5 m (5
yards), and thereafter according to service interval. (See
page G-24.)
9Y1210824GEG0122US0
Models L3560
Tire
7-16, 7.2-16
Farm
27 × 8.50-15
Turf
27 × 10.50-15
Turf
29 × 12.50-15
Turf
10-16.5
IND
Tread
1115 mm
(45.5 in.)
1200 mm
(47.2 in.)
1230 mm
(48.4 in.)
1170 mm
(46.1 in.)
1195 mm
(47.0 in.)
Models L4060
Tire
8-16, 8.3-16
Farm
27 × 8.50-15
Turf
27 × 10.50-15
Turf
29 × 12.50-15
Turf
10-16.5
IND
Tread
1155 mm
(45.5 in.)
1200 mm
(47.2 in.)
1230 mm
(48.4 in.)
1170 mm
(46.1 in.)
1195 mm
(47.0 in.)
Models L4760
Tire
8-16, 8.3-16
Farm
27 × 10.50-15
Turf
29 × 12.50-15
Turf
305R343
Turf
10-16.5
IND
Tread
1300 mm
(51.2 in.)
1375 mm
(54.1 in.)
1425 mm
(56.1 in.)
1455 mm
(57.3 in.)
1340 mm
(52.8 in.)
Models L5060, L5460, L6060
Tire
9.5-16
Farm
27 × 10.50-15
Turf
29 × 12.50-15
Turf
305R343
Turf
10-16.5
IND
Tread
1340 mm
(52.8 in.)
1375 mm
(54.1 in.)
1425 mm
(56.1 in.)
1455 mm
(57.3 in.)
1340 mm
(52.8 in.)
Tightening torque
Rear wheel mounting
screws and nut
215 N·m
22 kgf·m
160 lbf·ft
(1) Rear Wheel Mounting Screws and
Nut
KiSC issued 03, 2016 A