Kubota WSM L3560, Workshop Manual

Page: 47 / 801

GENERAL
L3560, L4060, L4760, L5060, L5460, L6060, WSM
G-18
Checking Coolant Level
CAUTION
• Do not remove radiator cap while coolant is hot. When cool,
slowly rotate cap to the first stop and allow sufficient time
for excess pressure to escape before removing the cap
completely.
1. Check to see that the coolant level is between the
"FULL"
and
"LOW"
marks of recovery tank.
2. When the coolant level drops due to evaporation, add water
only up to the full level.
In case of leakage, add anti-freeze and water in the specified
mixing ratio up to the full level. (Refer to "4. LUBRICANTS,
FUEL AND COOLANT" on page G-9.)
IMPORTANT
• If the radiator cap has to be removed, follow the caution
above and securely retighten the cap.
• Use clean, fresh water and anti-freeze to fill the recovery
tank.
9Y1210824GEG0015US0
Checking Dust Indicator (L3560)
There is a dust indicator on the air cleaner body. If the red signal
on the dust indicator is visible, clean the element immediately (see
page G-28). Reset the red signal by pushing a
"RESET"
button
after cleaning.
9Y1210824GEG0016US0
Checking Dust Indicator (L4060, L4760, L5060, L5460, L6060)
There is a dust indicator on the air cleaner body. If the yellow
signal on the dust indicator has reached the red zone, clean the
element immediately (see page G-28). Reset the yellow signal by
pushing a
"RESET"
button after cleaning.
9Y1210824GEG0017US0
(1) Recovery Tank
A: FULL
B: LOW
(1)
"RESET"
Button
(2) Dust Indicator
(3) Red Signal
(1)
"RESET"
Button
(2) Dust Indicator
(3) Yellow Signal
(4) Red Zone
KiSC issued 03, 2016 A