Kubota WSM L3560, Workshop Manual

Page: 16 / 801

INFORMATION
L3560, L4060, L4760, L5060, L5460, L6060, WSM
I-10
3. SPECIFICATIONS
[1] MANUAL TRANSMISSION
NOTE
• *Manufacturer's estimate
The company reserve the right to change the specifications without notice.
9Y1210824INI0008US0
Model
L3560 L4060
4WD
Engine
Model D1803-CR-E4 V2403-CR-E4
Type Direct injection vertical, water-cooled, 4-cycle diesel
Number of cylinders 3 4
Total displacement 1.826 L (111.4 cu.in.) 2.434 L (148.5 cu.in.)
Bore and stroke 87 × 102.4 mm (3.4 × 4.0 in.)
Rated revolution 2700 min
-1
(rpm)
Low idling revolution 800 min
-1
(rpm)
Net power* 26.1 kW (35.0 HP) 29.8 kW (40.0 HP)
PTO power*
(factory observed)
22.0 kW (29.5 HP) / 2700 min
-1
(rpm) 25.4 kW (34.0 HP) / 2700 min
-1
(rpm)
Maximum torque 114.1 N·m (84.2 lbf·ft) 133.5 N·m (98.5 lbf·ft)
Battery capacity 12 V, RC: 133 min, CCA: 582 A
Capacities
Fuel tank 51 L (13.5 U.S.gals, 11.2 Imp.gals)
Engine crankcase (with filter) 6.7 L (7.1 U.S.qts, 5.9 Imp.qts) 8.2 L (8.7 U.S.qts, 7.2 Imp.qts)
Engine coolant 7.5 L (7.9 U.S.qts, 6.6 Imp.qts)
Transmission case 42 L (11.1 U.S.gals, 9.24 Imp.gals) 43 L (11.4 U.S.gals, 9.46 Imp.gals)
Dimensions
Overall length (without 3p) 2920 mm (115.0 in.) 3085 mm (121.5 in.)
Overall width (min. tread) 1520 mm (59.8 in.) 1690 mm (66.5 in.)
Overall height (with ROPS) 2470 mm (97.2 in.) 2480 mm (97.6 in.)
Wheel base 1805 mm (71.1 in.) 1895 mm (74.6 in.)
Min. ground clearance 342 mm (13.5 in.) 360 mm (14.2 in.)
Tread
Front 1155 mm (45.5 in.)
Rear
1200 mm (47.2 in.), 1300 mm (51.2 in.),
1385 mm (54.5 in.), 1480 mm (58.3 in.)
1285 mm (50.6 in.), 1435 mm (56.5 in.),
1530 mm (60.2 in.)
Weight (with ROPS) 1590 kg (3505 lbs) 1635 kg (3605 lbs)
Traveling
system
Standard tire
size
Front 7-16 8.3-16
Rear 12.4-24 14.9-24
Clutch Dry type single stage
Steering Hydrostatic power steering
Transmission 8 forward and 8 reverse fully synchronized main and shuttle transmission
Braking system Wet disk type
Min. turning radius
(with brake)
2.7 m (8.9 feet)
Hydraulic unit
Hydraulic control system Position control
Pump capacity 31.5 L (8.3 U.S.gals, 6.9 Imp.gals) 37.0 L (9.8 U.S.gals, 8.1 Imp.gals)
Three point hitch SAE category 1
Max. lift force
At lift points 1700 kg (3750 lbs) 1750 kg (3860 lbs)
24 in. behind
lift points
1200 kg (2650 lbs) 1250 kg (2760 lbs)
System pressure 17.7 MPa (180 kgf/cm
2
, 2560 psi)
PTO
Rear PTO SAE 1-3/8, 6 splines
PTO/Engine speed 540 min
-1
(rpm) / 2550 min
-1
(rpm)
KiSC issued 03, 2016 A