Kubota WSM L3560, Workshop Manual

Page: 616 / 801

ELECTRICAL SYSTEM
L3560, L4060, L4760, L5060, L5460, L6060, WSM
9-M30
(Continued)
9Y1210824ELM0048US0
Display Model Message Description
A
HST "L", "H", "M" or "N"
Display the position of the range gear shift that was
selected with the range gear shift lever.
GST
"F1" to "F12" or "R1"
to "R12" or "N"
"F" is displayed when forward operation is selected with
the shuttle lever.
"R" is displayed when reverse operation is selected.
Displays the number of the gear shift ratios that was
selected with the main gear shift lever.
"N" is displayed when the lever is in the neutral position.
Manual
Transmission
"F", "R" or "N"
"F" is displayed when forward operation is selected with
the shuttle lever.
"R" is displayed when reverse operation is selected.
"N" is displayed when the lever is in the neutral position.
All Model
Appears when the time for an engine oil change has
come.
Change the engine oil with fresh one.
Stays displayed for 3 seconds or so after the engine
has got started. Buckle up the seat belt.
Stays displayed while the cooling water temperature is
too low and the glow plug is being activated. Wait until
this symbol disappears and get the engine started.
Appears when the fuel has become less than 6 L (1.5
U.S.gals) or so. Refuel as soon as possible. If the fuel
tank becomes empty, air will enter the fuel system,
thereby requiring a bleeding.
0.1 to 34
Displays the travel speed. (The actual speed is different
from the displayed one if the tires slip in towing or other
jobs.)
0:00 to 11:59
Displays the clock. When (― ― : ― ―) is displayed,
make the time setting.
Nothing is displayed if this is disabled.
B All Model
Messages on the
right side on the
lower side of the
IntelliPanel™
The hour meter, trip meter, fuel consumption, PTO rpm,
HST setting, PM volume status, time elapsed since the
previous engine oil change and other data can be
displayed.
KiSC issued 03, 2016 A