Kubota WSM L3560, Workshop Manual

Page: 607 / 801

ELECTRICAL SYSTEM
L3560, L4060, L4760, L5060, L5460, L6060, WSM
9-M21
Display Mode Switch and Auto Throttle Advance
Switch (HST Only)
These switches (1), (2) are located at the left side of
the electronic instrument panel and both are of tact type.
Usually, the display mode switch (1) is used at the
switching of display indication, and the auto throttle
advance switch (2) is used to switching to the auto
throttle advance as well as at data input and fine
adjustment.
9Y1210824ELM0021US0
Parking Brake Switch
This switch (1) is turned on and off interlocked with
the parking brake lever (2). It is switched on when the
parking brake is applied, thereby sending a signal to light
up the pilot lamp at the electronic instrument panel.
9Y1210824ELM0023US0
Shuttle Switch: For Manual Transmission and GST
This switch (1) is mounted at the bottom of the
shuttle lever shaft (2) and is turned on when the position
of
F
,
N
, or
R
is detected through the movement of the
sensor lever, thereby outputting a 12 V signal to the
electronic instrument panel and ECU.
It also serves as a safety switch when the engine is
started.
9Y1210824ELM0024US0
(1) Display Mode Switch (2) Auto Throttle Advance
(1) Parking Brake Switch
(2) Parking Brake Lever
[A] Manual Transmission /
GST
[B] HST
(1) Shuttle Switch (2) Shuttle Lever Shaft
KiSC issued 03, 2016 A