Kubota WSM L3560, Workshop Manual

Page: 492 / 801

FRONT AXLE
L3560, L4060, L4760, L5060, L5460, L6060, WSM
6-S2
2. SERVICING SPECIFICATIONS
Item Factory Specification Allowable Limit
Front Wheel Alignment Toe-in 2 to 8 mm
0.08 to 0.3 in.
–
Front Wheel Axial Sway 5.0 mm
0.20 in.
–
Bevel Gear Case to Stopper
(L4760, L5060, L5460 and L6060)
Clearance 1.0 to 3.0 mm
0.040 to 0.11 in.
–
Differential Case, Differential Case Cover to
Differential Side Gear (L3560 and L4060)
• Differential Case
• Differential Case Cover
• Differential Side Gear
Clearance
I.D.
I.D.
O.D.
0.050 to 0.151 mm
0.0020 to 0.00594 in.
32.000 to 32.062 mm
1.2599 to 1.2622 in.
32.000 to 32.025 mm
1.2599 to 1.2608 in.
31.911 to 31.950 mm
1.2564 to 1.2578 in.
0.20 mm
0.0079 in.
–
–
–
Differential Case, Differential Case Cover to
Differential Side Gear
(L4760, L5060, L5460 and L6060)
• Differential Case
• Differential Case Cover
• Differential Side Gear
Clearance
I.D.
I.D.
O.D.
0.050 to 0.114 mm
0.0020 to 0.00448 in.
32.000 to 32.025 mm
1.2599 to 1.2608 in.
32.000 to 32.025 mm
1.2599 to 1.2608 in.
31.911 to 31.950 mm
1.2564 to 1.2578 in.
0.20 mm
0.0079 in.
–
–
–
Pinion Shaft to Differential Pinion
• Pinion Shaft
• Differential Pinion
Clearance
O.D.
I.D.
0.064 to 0.100 mm
0.0026 to 0.00393 in.
13.950 to 13.968 mm
0.54922 to 0.54992 in.
14.032 to 14.050 mm
0.55244 to 0.55314 in.
0.25 mm
0.0098 in.
–
–
Differential Pinion to Differential Side Gear
(L3560 and L4060)
Backlash 0.10 to 0.30 mm
0.0040 to 0.011 in.
0.40 mm
0.016 in.
Differential Pinion to Differential Side Gear
(L4760, L5060, L5460 and L6060)
Backlash 0.20 to 0.30 mm
0.0079 to 0.011 in.
0.40 mm
0.016 in.
Spiral Bevel Pinion Shaft Turning Torque 0.98 to 1.1 N·m
0.10 to 0.12 kgf·m
0.73 to 0.86 lbf·ft
–
Spiral Bevel Pinion Shaft to Spiral Bevel
Gear (L3560 and L4060)
Backlash 0.10 to 0.30 mm
0.0040 to 0.011 in.
–
Spiral Bevel Pinion Shaft to Spiral Bevel
Gear (L4760, L5060, L5460 and L6060)
Backlash 0.20 to 0.30 mm
0.0079 to 0.011 in.
–
Bevel Gear to Bevel Gear
(L3560 and L4060)
Backlash 0.15 to 0.30 mm
0.0059 to 0.011 in.
–
Bevel Gear to Bevel Gear
(L4760, L5060, L5460 and L6060)
Backlash 0.20 to 0.30 mm
0.0079 to 0.011 in.
–
KiSC issued 03, 2016 A