Kubota WSM L3560, Workshop Manual

Page: 767 / 801

CABIN
L3560, L4060, L4760, L5060, L5460, L6060, WSM
10-S24
Connector Voltage
1. Disconnect the
16P
connector (2) from control panel switch.
2. Turn the main switch to
"ON"
position.
3. Measure the voltage with a voltmeter across the terminal
15
and
terminal
5
.
4. If the voltage differs from the battery voltage, the wiring harness,
A/C relay or fuse is faulty.
9Y1210824CAS0053US0
A/C Switch Checking
1. Measure the voltage with a voltmeter across the terminal
11
and
chassis.
2. Turn the main switch to
"ON"
position.
3. Turn the blower switch to
"ON"
position.
4. Press the air conditioner switch to set it to
"OFF"
position
(indicator: OFF), and then measure a voltage using a circuit
tester.
5. Press the air conditioner switch to set it at
"ON"
position
(indicator: ON), and then measure a voltage using a circuit
tester.
6. If a measured voltage does not comply with the values in the
table below, the control panel, wiring harness or fuse is faulty.
9Y1210824CAS0054US0
Voltage Terminal
15
– Terminal
5
Approx. battery voltage
(1) Control Panel
(2)
16P
Connector (Switch Side)
(3)
16P
Connector (Wire Harness Side)
Voltage
Terminal
11
–
Chassis
A/C switch at
ON
Approx. battery voltage
A/C switch at
OFF
Approx. 1 V
(1)
16P
Connector (Switch Side) (2)
16P
Connector (Wire Harness Side)
KiSC issued 03, 2016 A