Kubota M105S, Workshop Manual

Page: 61 / 561

G-46
M105S, WSM G GENERAL
NOTE
■
• The following special tools are not provided, so make them referring to the figure.
Small End Bushing Replacing Tool
Application: Use to press out and to press fit the small end bushing.
[Press out]
[Press fit]
W1031485
A 157 mm (6.1811 in.)
B 14.5 mm (0.571 in.)
C 120 mm (4.7244 in.)
D 30.0 mm dia. (1.1811 in. dia.)
E 32.95 mm dia. (1.2972 in. dia.)
F 20 mm dia. (0.7874 in. dia.)
a 6.3
μ
m (250
μ
in.)
b 6.3
μ
m (250
μ
in.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
A 157 mm (6.1811 in.)
B 14.5 mm (0.571 in.)
C 120 mm (4.7244 in.)
D 30.0 mm dia. (1.1811 in. dia.)
E 42.000 mm dia. (1.6535 in. dia.)
F 20 mm dia. (0.7874 in. dia.)
a 6.3
μ
m (250
μ
in.)
b 6.3
μ
m (250
μ
in.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
KiSC issued 03, 2007 A