Kubota M105S, Workshop Manual

Page: 213 / 561

2-S16
M105S, WSM CLUTCH
(4) PTO Clutch Pack
Draining Transmission Fluid
1. Place an oil pan underneath the transmission case.
2. Remove the drain plugs (1).
3. Drain the transmission fluid.
4. Reinstall the drain plugs (1).
(When reassembling)
• Fill up from filling port after removing the filling plug until reaching
the gauge.
• After running the engine for few minutes, stop it and check the
fluid level again, add the fluid to prescribed level if it is not correct
level.
IMPORTANT
■
• Use only KUBOTA SUPER UDT fluid. Use of other fluids
may damage the transmission or hydraulic system.
• Refer to “LUBRICANTS, FUEL AND COOLANT” (See page
G-8.)
• Do not mix difference brands oil together.
W1020481
Draining Fuel
1. Place oil pans under the right side fuel tank.
2. Remove the drain cover (2) at the bottom of side fuel tank (1).
3. Drain the fuel.
4. Reinstall the drain cover (2) on the fuel tank (1).
(When reassembling)
• Be sure to fix the O-ring (3) is in position on the drain cover (2).
W1021162
Separating Cabin from Tractor Body
1. See “10. CABIN” (Page 10-S35).
2. Check the clutch housing case and transmission case are
securely mounted on the disassembling stands.
3. Remove the rear wheels.
(When reassembling)
W1021412
Transmission fluid Capacity
60.0 L
63.4 U.S.qts
52.8 Imp.qts
(1) Drain Plug
Fuel Tank Capacity
175 L
46.2 U.S.gals
38.5 Imp.gals
(1) Fuel Tank
(2) Drain Cover (3) O-ring
(4) Screw
Tightening torque Rear wheel mounting nut
343 to 401 N·m
35 to 41 kgf·m
254 to 294 ft-lbs
KiSC issued 03, 2007 A