Kubota M105S, Workshop Manual

Page: 543 / 561

10-S34
M105S, WSM CABIN
(13) Wiper Motor Relay
Wiper Motor Relay
1. Remove the wiper motor relay (1).
2. Connect jumper leads across the 4 terminal and the bulb
terminal, and across the 5 terminal and the bulb terminal.
3. Connect jumper leads across the battery negative terminal and
the 3 terminal.
4. Connect jumper leads across the battery positive terminal and
the 2 terminal.
Bulb lights up continuously (under A condition).
5. Connect jumper lead across the battery positive terminal and the
1 terminal (under B condition).
Bulb lights up and an intermittent sound is heard from relay.
6. If any defective is found, replace it.
W1046930
(14) Front Wiper Motor
Front Wiper Motor
1. Raise up the front wiper arm (1).
2. Turn on the main switch.
3. Push the front wiper switch to ON position.
4. Count the number of wiper arm moving per minutes.
5. If the number differs from the factory specifications, replace the
wiper motor assembly.
W1047741
(1) Wiper Motor Relay
(2) Battery
(3) Bulb
(4) Wiper Motor
(5) Wiper Switch (6) Switch on "INT."
(7) Switch on "ON."
A : Wiper Switch ON Condition
B : Wiper Switch INT. Condition
Wiper arm moving at no
load
Factory spec. 33 to 43 times / min.
(1) Wiper Arm
KiSC issued 03, 2007 A