Kubota M105S, Workshop Manual

Page: 64 / 561

G-49
M105S, WSM G GENERAL
Balancer Bushing Replacing Tool 1 Assembly
Application: Use to press fit the bushing.
W1035596
Balancer Bushing Replacing Tool 1 Components Parts
1) Shaft
W1036035
No. name of Part Q'ty Remarks
1 Shaft 1 –
2 Piece 1 1 –
3 Piece 2 1 –
4 Bolt 2 M6
×
P1.0
A 498 mm (19.61 in.)
B 318.8 to 319.2 mm (12.5726 to 12.5669 in.)
C 102.8 to 103.2 mm (4.0472 to 4.0630 in.)
D 60 mm (2.36 in.)
E 8 mm (0.31 in.)
F 5 mm (0.20 in.)
G 30 mm dia. (1.18 in. dia.)
H 65 mm dia. (2.56 in. dia.)
I 6 mm (0.24 in.)
J Chamfer 1 mm (0.04 in.)
K 53 mm dia. (2.09 in. dia.)
L 54.7 to 54.9 mm dia. (2.1535 to 2.1614 in. dia.)
M 0.26 rad (15 °)
N Chamfer 0.5 mm (0.02 in.)
O 41 mm dia. (1.61 in. dia.)
P 32 mm dia. (1.26 in. dia.)
Q 33.961 to 34.0 mm dia. (1.3370 to 1.3386 in. dia.)
R 18 mm dia. (0.71 in. dia.)
S 19.967 to 20.0 mm dia. (0.7861 to 0.7874 in. dia.)
U 3 mm (0.12 in.)
V 149.1 to 149.4 mm (5.8701 to 5.8819 in.)
W 365.1 to 365.4 mm (14.3740 to 14.3858 in.)
X 123 mm (4.84 in.)
Y 375 mm (14.76 in.)
Z M6
×
P1.0 depth 7 mm (0.28 in.)
a Chamfer 2 mm (0.08 in.)
KiSC issued 03, 2007 A