Kubota M105S, Workshop Manual

Page: 539 / 561

10-S30
M105S, WSM CABIN
(9) Temperature Motor
Temperature Motor Check
1. Confirm whether the temperature control dial (3) is defective.
(See page 10-S29.)
2. Turn the main switch “ACC” position.
3. Turn the blower switch (2) at 1 position.
4. Turn the temperature control dial from COOL (a) position to
WARM (b). At the time, confirm the motor is operating.
5. If the motor does not operate, replace it.
W1023638
(10) Mode Motor
Mode Motor Check
1. Confirm whether the mode switch (3) is defective. (See page 10-
S29.)
2. Turn the main switch “ACC” position.
3. Turn the blower switch at 1 position.
4. Turn the mode switch each (a), (b) and (c).
5. Confirm whether the position where the mode motor (1) is
stopped synchronize with mode switch (3).
6. If the motor does not move, replace it.
W1044370
(1) Temperature Motor
(2) Blower Switch
(3) Temperature Control Dial (a) COOL
(b) WARM
(1) Mode Motor
(2) Blower Switch
(3) Mode Switch (a) Air is blown from only the face air
outlets
(b) Air is blown the foot, face and
door air outlets
(c) Air is blown the front and door air
outlets
KiSC issued 03, 2007 A