Kubota M105S, Workshop Manual

Page: 352 / 561

7-S3
M105S, WSM STEERING
3. CHECKING, DISASSEMBLING AND SERVICING
[1] CHECKING AND ADJUSTING
• Refer to checking “Steering Controller” in “8. HYDRAULIC SYSTEM” section.
[2] DISASSEMBLING AND ASSEMBLING
(1) Removing Steering Controller
Bonnet and Muffler Pipe
1. Remove the bonnet (1).
2. Remove the muffler pipe (2).
W1011906
Piping for Power Steering
1. Disconnect the turning delivery hoses (1).
2. Disconnect the main delivery pipe (2).
3. Disconnect the return pipe (3).
4. Disconnect the steering controller joint (4).
5. Remove the steering controller bracket (5).
6. Remove the steering controller (6).
(When reassembling)
W1012259
(1) Bonnet (2) Muffler Pipe
Tightening torque
Main delivery pipe and
return pipe retaining nut
47.1 to 51.0 N·m
4.8 to 5.2 kgf·m
34.7 to 37.6 ft-lbs
Turning delivery hose
retaining nut
22.0 to 27.0 N·m
2.2 to 2.8 kgf·m
16.2 to 20.0 ft-lbs
Steering controller
mounting screws
48.1 to 55.9 N·m
4.9 to 5.7 kgf·m
35.4 to 41.2 ft-lbs
(1) Turning Delivery Hose
(2) Main Delivery Pipe
(3) Return Pipe
(4) Steering Controller Joint
(5) Controller Bracket (6) Steering Controller
(7) Pump Port
(8) Return Port
(9) Left Turning Port
(10) Right Turning Port
KiSC issued 03, 2007 A