Kubota M105S, Workshop Manual

Page: 209 / 561

2-S12
M105S, WSM CLUTCH
Separating Engine from Clutch Housing
1. Check the engine and clutch housing case are securely mounted
on the disassembling stands.
2. Install the front axle rocking restrictor (1) (See page G-72) to the
front axle bracket.
3. Remove the floor mat (2) and panel cover (3).
4. Remove the engine mounting screws and nuts, and separate the
engine from the clutch housing.
(When reassembling)
• Apply molybdenum disulphide (Three Bond 1901 or equivalent)
to the splines of damper disc boss.
• Apply liquid gasket (Three Bond 1141, 1211 or equivalent) to joint
face of the engine and clutch housing.
W1015695
Tightening torque
Engine and clutch housing
mounting screw, nut
124 to 147 N·m
12.6 to 15.0 kgf·m
91.2 to 108 ft-lbs
Engine and clutch housing
mounting stud bolt
38.2 to 45.1 N·m
3.9 to 4.6 kgf·m
28.2 to 33.3 ft-lbs
(1) Front Axle Rocking Restrictor
(2) Floor Mat (3) Panel Cover
KiSC issued 03, 2007 A