COMe-mAL10 – User Guide, Rev. 1.3
www.kontron.com
// 61
Sub-Screen
Function
Second level Sub-Screen / Description
Network Stack
Configuration>
Network Stack>
UEFI network stack
[Enabled, Disabled]
Ipv4 PXE
Support>
Enables Ipv4 PXE boot support
Note: If disabled IPV4 PXE boot option is not created.
[Enabled, Disabled]
Ipv4 HTTP
Support>
Enables Ipv4 HTTP boot support
Note: If disabled IPV4 HTTP boot option is not created.
[Enabled, Disabled]
Ipv6 PXE
Support>
Enabled Ipv6 PXE boot support
Note: If disabled IPV6 PXE boot option is not created.
[Enabled, Disabled]
Ipv6 HTTP
Support>
Enables Ipv6 HTTP boot support
Note: If disabled IPV6 HTTP boot option is not created.
[Enabled, Disabled]
PXE Boot Wait
Time>
Displays wait time to press ESC key to abort the PXE boot
Media Detect
Count>
Displays number of times presence of media is detected
USB
Configuration>
Read only fields
USB Configuration, UBS module Version, USB controllers, and USB devices
Legacy USB
Support>
Enable- supports legacy USB
Auto– disables legacy support, if no USB devices are connected
Disable-keeps USB devices available for EFI applications only
[Enabled, Disabled, Auto]
XHCI Hand-off>
XHCI ownership change claimed by XHCI driver.
Note: This is a work around for OS(s) without XHCI hand-off support.
[Enabled, Disabled]
USB Mass
Storage Driver
Support>
Enables or disables USB mass storage driver support
[Enabled, Disabled]
USB Transfer
Time-out>
Displays timeout value for control, bulk and interrupt transfers
[1 sec, 5 sec, 10 sec, 20 sec]
Device Reset
Time-out>
Displays USB mass storage device start unit command time-out
[10 sec, 20 sec, 30 sec, 40 sec]
Device Power-
up Delay>
Displays maximum time taken for the device to report itself to the
host properly. Auto uses the default :root port 100 ms /hub port delay
is taken from hub port descriptor.
[Auto, Manual]
