COMe-mAL10 – User Guide, Rev. 1.3
www.kontron.com
// 71
Function
Second level Sub-Screen / Description
USB
Configuration>
(continued)
USB Port Disable
Override>
Selectively enables or disables the corresponding USB port
from reporting a device connection to the controller.
[Enabled, Disabled]
xDCI Support>
XDCI
[Disable, PCI Mode]
USB HW Mode AFE
Comparators>
USB HW mode AFE comparators
[Enabled, Disabled]
Miscellaneous
Configuration>
8254 Clock Gating>
8254 Clock gating
[Enabled, Disabled]
State After G3>
Specifies the state to go to if power is reapplied after power
failure (G3 state)
S0 state: system boots directly as soon as power is applied.
S5 state: system remains in power-off states until the power
button is pressed.
[S0 State, S5 State]
Board Clock Spread
Spectrum>
Clock chip’s spread spectrum feature
[Enabled, Disabled]
Wake On LAN>
Wake on LAN
[Enabled, Disabled]
BIOS Lock>
SC BIOS Lock features
NOTE: Required to be enabled to ensure SMM protection of
flash.
[Enabled, Disabled]
DCI Enable
(HDCIEN)>
If enabled the user is considered to have consented to enable
DCI and allows debug over the USB 3 interface.
If disabled, the host controller does not enable the DCI feature.
[Enabled, Disabled]
DCI Auto Detect
Enable>
If set, DCI Auto detects if DCI is connected during BIOS post time
and enables DCI. If not set, DCI is disabled.
[Enabled, Disabled]
