COMe-mAL10 – User Guide, Rev. 1.3
www.kontron.com
// 54
6.2.1.
Main Setup Menu
On entering the uEFI BIOS, the setup program displays the Main Setup menu. This screen lists the Main Setup menu
sub-screens and provides basic system information as well as functions for setting the system language, time and
date.
Figure 5: Main Setup Menu Initial Screen
The following table shows the Main Menu sub-screens and functions and describes the content.
Table 28: Main Setup Menu Sub-screens and Functions
Sub-Screen
Description
BIOS
Information>
Read only field
BIOS vendor, Core version, Compliancy, Project version, Build date and time, and Access level
Memory
Information>
Read only field
Total memory and Memory speed
Platform
Information>
Read only field
Module Information
Product name, Revision, Serial # ‚MAC address, Boot counter, and CPLD rev
Additional information for MAC Address
The MAC address entry is the value used by the Ethernet controller and may contain the entry
‘Inactive’ - Ethernet chip is inactive. To activate the Ethernet chip set the following:
Advanced > Network Stack Configuration > Network Stack > Enable
88:88:88:88:87:88 is a special pattern that will be filled in by the Ethernet firmware if there is
no valid entry in the firmware block of the BIOS SPI (i.e. the MAC address has been overwritten
during the last attempt to flash the system).
System Date>
Displays the system date [Week day mm/dd/yyyy]
System Time>
Displays the system time [hh:mm:ss]
