COMe-mAL10 – User Guide, Rev. 1.3
www.kontron.com
// 21
2.3.9.
USB
Both USB 3.0 and USB 2.0 ports are available, where USB 3.0 ports are backwards compatible with the USB 2.0
specification. A maximum of eight USB 2.0 ports are supported, this is made up on six USB 2.0 pots and
two USB3.0/2.0 ports
The following table lists the supported USB features.
USB Ports
2x USB 3.0 (Including USB 2.0)
6x USB 2.0
USB Over Current Signals
4x
USB Client Port
1x (COMe port 7 can be configured as client port on all COMe-mAL10
variants)
The USB 3.0 and USB 2.0 port combinations and the relationship between the COMe connector number and the
SoC port number are listed in the following table.
COMe Port
SoC
High- Speed
I/O Port
USB 2.0
USB 3.0
Comment
USB0
USB#_1
Optionally, SoC port 0 (USB 3.0/2.0 dual role) might
be connected to COMe port 0
USB1
USB#_2
USB2
USB#_3
USB3
USB#_4
USB4
USB#_5
USB5
USB#_6
USB6
USB#_7
Kontron’s security chip is available on request. The
security chip is connected to SoC Port 7 and COMe
Port 6 (USB6) is not available with this option.
USB7
USB#_0
USB dual role (Client / Host)
The xHCI controller supports wake up from suspend states S3, S4 and S5.
2.3.10.
SATA
The SATA high-speed storage interface supports two SATA Gen.3 ports with transfer rates of up to 6 Gb/s. The
following SATA ports are available at the specified COMe connector ports.
The following table lists the supported SATA features.
COMe Port
SoC I/O Port
Comment
SATA_0
SATA #0
SATA Gen.3, 6 Gb/s
SATA_1
SATA #1
SATA Gen.3, 6 Gb/s
