COMe-mAL10 – User Guide, Rev. 1.3
www.kontron.com
// 78
5.
On the next start, boot into shell (see Chapter 6.3.1.1 Entering the uEFI Shell).
6.
Change to the drive representing the USB stick.
fsx: (x = 0,1,2,etc. represents the USB stick)
And then change to the directory where you copied the flash tool.
cd <your_directory>
7.
Start flash.nsh (if available) OR enter
fpt –F mal10r<xxx>.bin
8.
Wait until flashing is successful and then power cycle the board.
Do not switch off the power during the flash process!
Switching off the power during the flash process leaves your module unrecoverable.
Changes made when the BIOS lock is disabled (previous step 3) are only effective during the
first boot, after applying the changes. If the system is not flashed during the next, the
update procedure might have to be repeated.
