COMe-mAL10 – User Guide, Rev. 1.3
www.kontron.com
// 19
2.3.3.
Platform Controller Hub (PCH)
The Intel® Apollo Lake® processor family is a System on Chip (SoC) solution, including an integrated chipset.
The following table lists specific PCH features.
USB
2x USB 3.0 (Including USB 2.0)
6x USB 2.0
VT-d
Supported
SATA RAID
Not supported
2.3.4.
System Memory
The system memory supports a single DDR3L memory down configuration with a capacity of up to 8 GB. The
maximum data transfer rate is 1866 MT/s for commercial temperature graded variants (non ECC). For industrial
variants (ECC), the transfer rate is limited to 1600 MT/s.
The following table lists specific system memory features.
Memory Down
4 GB and 8 GB - DDR3L
Non ECC (for commercial temperature grade)
ECC (for industrial temperature grade)
Peak Bandwidth
29.86 GB/s (for commercial temperature grade)
25.60 GB/s (for Industrial temperature grade)
2.3.5.
Graphics
2.3.5.1.
Digital Display Interfaces
Using DP 1.2 ‘Multi Media Stream Transport’ it is possible to have two independent displays on DDIO. In total, a
maximum of three independent displays are possible if including LVDS.
The COMe-mAL10 supports the following digital display interfaces (DDIs):
2x DP 1.2 on DDIO
1x eDP 1.4/LVDS
For the DP++ interface, it is recommended to use DP-to-HDMI and DP-to-DVI dongles that
are compliant to the VESA DisplayPort Dual-Mode Standard only.
Otherwise there might be display detection issues, if dongles are used with FET level shifter
for DDC translation.
