Konica Minolta FAX 2900, User Manual

Page: 290 / 342

9.2 Getting Ready 9
9-43
Int
er
net F
a
x &
Ne
twor
k
Sc
an
Ch
apte
r 9
9
Press the [No] key when you have
finished adding addresses.
The FAX REGISTRATION screen
appears again.
Specifying the Settings for a Speed Dial Number
1
Press the [Utility] key.
2
Press the key until “FAX
REGISTRATION” appears.
3
Press the [2] key on the 10-key pad
to select “SPEED DIAL”.
4
Use the 10-key pad to enter the 3-
digit speed dial number where you
wish to add an address. (Example:
011)
5
Enter the recipient name.
H For information on entering text,
refer to
“Entering Text” on
page 3-18 .
H
Up to 20 characters can be entered for the recipient name.
6
Press the [Yes] key.
7
Enter the e-mail address of the
recipient.
H
For information on entering text,
refer to
“Entering Text” on page 3-18 .
H Up to 64 characters can be entered for the e-mail address.
H If only numbers are entered for the address, it will be regarded as
a fax number.
8
Press the [Yes] key.
H The [Yes] key cannot be pressed if the e-mail address does not
contain “@”.
H The settings are registered. To add information for other speed dial
numbers, repeat steps 4 through 8.