Konica Minolta FAX 2900 User Manual Download Page 127

Page: 127 / 342

6.1 Transmission Methods

6-18

x T

ran

ion

/Rec

ept

ion

thod

Cha

pter 6

Using the [

] and [

] keys,

select either “SINGLE” or
“MULTI”, and then press the [Yes]
key.

To allow only one polling
transmission request, then delete the document from the memory, select
“SINGLE”.

To allow multiple polling transmission requests, select “MULTI”. The
document is stored in the memory until it has been deleted.

Using the 10-Key Pad, enter the 4-
digit polling ID, and then press the
[Yes] key.

If you do not wish to set a
polling ID, skip to step 8.

The polling ID can be set to any number between 0000 and 9999.

If there is only one polling transmission document, it is not necessary to
specify a polling ID and password.

Using the 10-Key Pad, enter the 4-
digit password.

If you do not wish to set a
password, continue with step
8.

The password can be set to any number between 0000 and 9999.

Press the [Start] key.

The machine scans the document, then enters standby mode.

Summary of Contents for FAX 2900






















































































































































































































































































































































Search results

Summary of Contents for FAX 2900

Reviews:

Brands by name

Popular brands

Konica Minolta FAX 2900, User Manual

Search results

Summary of Contents for FAX 2900

Reviews:

Brands by name

Popular brands