Konica Minolta FAX 2900, User Manual

Page: 192 / 342

7.7 Setting Up the Transmission 7
7-55
Usi
ng the Util
it
y
M
ode
Ch
apte
r 7
7.7 Setting Up the Transmission
From the “TX OPERATION” menu, various functions for sending faxes can be set.
Selecting the “TX OPERATION” menu
1
Press the [Utility] key six times.
“TX OPERATION” appears.
2
From the 10-Key Pad, press the key ([1] through [4]) for the “TX OPERATION”
function that you wish to set.
H The “TX OPERATION” functions are as follows:
1 SCAN CONTRAST
2 RESOLUTION
3 DEFAULT TX
4 HEADER
No. TX OPERATION Characteristic/Description
1 SCAN CONTRAST This function can be used to set the default scanning contrast level to one
of five settings between “LIGHT” and “DARK”.
For dark-colored paper (media), select a setting towards “LIGHT”. For
faint or colored text, select a setting toward “DARK”.
2 RESOLUTION This function can be used to set the default scanning resolution (image
quality) to one of the following: “Standard”, “Fine”, “Super Fine”, “Half
Tone + Standard”, “Half Tone + Fine” or “Half Tone + Super Fine”.
• The manufacturer’s default setting is “Standard”.
3 DEFAULT TX This function can be used to set the default transmission mode to
“MEM.TX” or “ADF TX”.
MEM.TX: memory transmission
ADF TX: direct transmission
• The manufacturer’s default setting is “MEM.TX”.
4 HEADER This function can be used to set the default setting (“ON” or “OFF”) for
adding the header (date sent, sender’s name and fax number, etc.) when
sending faxes.
• The manufacturer’s default setting is “ON”.
Utility