Konica Minolta DRYPRO Model 793, Operation Manual

Page: 66 / 156

Ch.4 Maintenance Mode
< 64 >
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
4-4-5 CALIBRATION <PRINT SETUP>
Allows to calibrate and correct the density of the printed film.
The DRYPRO793 incorporates a densitometer in the Cooling/Discharge section, which enables to per-
form an automatic density control of the image every time when a new film package is loaded.
In normal condition, it is not necessary to make a density correction of the image. However, when a
density irregularity occurs, follow the procedures below to print a calibration sheet to perform an auto-
matic density correction.
2
Touch the [PRINT SETUP] button of the "Main-
tenance" screen.
3
Touch the [CALIBRATION] button.
- "Output Tray Select" screen will be displayed.
- Touching the [RETURN] button will exit the Mainte-
nance Mode, and return to the Normal screen.
3
4
4
Touch the arrow buttons [
t
], [
s
] to select the
tray for the film to be printed.
5
Touch the [PRINT] button.
- A confirmation message will be displayed.
5
Description of [SUPPLY TRAY] button display
From the left, output tray information, that are "1: Tray No.", "2: Film Size",
"3: Film Type", "4: Copies" are displayed on the [SUPPLY TRAY] button.
1
Change to the Maintenance Mode.
p.52 Switching to
the Mainte-
nance Mode
User Level
1 2 3
Disp
● ● ●
Ope
● ● ●