Konica Minolta DRYPRO Model 793, Operation Manual

Page: 148 / 156

Ch.7 Care & Maintenance
< 146 >
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
7-2 Maintenance/Inspection Schedule
In order to ensure optimum performance from the DRYPRO 793, inspection and cleaning procedures should be car-
ried out following the schedule shown below.
Maintenance Procedures to be Carried out by the Customer
Details of Other Maintenance/Inspection Procedures
The following is intended only as as guide: the actual schedule will depend on how
the unit is used.
Work Schedule
Weekly Every 3 mos Every 6 mos Ref. Page
Maintenance Work
1) Cleaning the Film Ejection Tray
●
142
2) Cleaning the Inlet/Outlet
●
142
3) Cleaning the Supply Tray
●
142
4) Replacing the Deodorant Filter 10,000 print or 6 mos as a guide 142
5) Cleaning the Descent Transport Adhesion Roller 2,000 prints (only for mammo use) 145
6) Printing &Checking the SMPTE pattern
●
145
Component Description of Work Work Schedule
HPRO Unit Facing Rollers Clean with alcohol every 20,000 prints
HPRO Drum Clean with alcohol every 20,000 prints
HPRO Cover Replacement every 40,000 prints
HPRO Drum Shaft Bearing Replacement every 20,000 prints
Separator Unit Replacement every 20,000 prints
Insertion Guide Unit Cleaning every 40,000 prints
Facing Roller Cleaning Pad Replacement every 40,000 prints
Cooling Unit Primary Cooling Guide Replacement every 40,000 prints
Secondary Cooling Guide Clean with alcohol every 20,000 prints
Deodorant Filter Case Replacement every 40,000 prints or
every 2 yrs
Periphery of Deodorant Filter Case Dust cleaning every 20,000 prints
Inlet for cooling Dust cleaning every 20,000 prints
Lint-free roller Replacement every 40,000 prints
Densitometer Cleaning every 20,000 prints
Descent Transport Adhesive Roller Cleaning sheet every 20,000 prints
Unit
Controller Unit Hard Disk Replacement 20,000hrs of operation or
every 5 yrs
Inlet Filter Dust cleaning every 6 mos
Power Unit Inlet Filter Dust cleaning every 6 mos
Supply Unit Suction Cup Clean with alcohol every 20,000 prints
Whole Unit Dust cleaning every 20,000 prints