Konica Minolta DRYPRO Model 793 Operation Manual Download Page 133

Page: 133 / 156

Ch.6 Troubleshooting

< 131 >

DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1

Install the Deodorant Filter Case.

- With your left hand holding the handle (green) at the

front of the Deodorant Filter Case, and your right hand
holding the handle (green) at the top, install the
Deodorant Filter Case.

Turn the Lever-A clockwise.

- Engages the Deodorant filter Case Lock.

Close the Front Top Cover by your hand.

- "READY" will be displayed in the message column

when the jam release sequence is completed, and the
DRYPRO 793 becomes ready to print.

- The print job that has been interrupted due to the film

jam will be reregistered, and printed with a priority.

When failed to install the Deodorant Filter Case or forgot install it, an error message

"E4723 No Filter" will be displayed. Make sure to install the Deodorant Filter Case.

When there were other print jobs left, they will be automatically printed after the filter
installation.

Animation of Jam
Release in the Cooling
Unit.

Open the Ejection Transport Unit Cover (1 in the

left fig.), and remove the jam film (2 in the left

fig.).

Close the Ejection Transport Unit Cover.

Summary of Contents for DRYPRO Model 793





























































































































































Search results

Summary of Contents for DRYPRO Model 793

Reviews:

Related manuals for DRYPRO Model 793

Brands by name

Popular brands

Konica Minolta DRYPRO Model 793, Operation Manual

Search results

Summary of Contents for DRYPRO Model 793

Reviews:

Related manuals for DRYPRO Model 793

Brands by name

Popular brands