Konica Minolta DRYPRO Model 793, Operation Manual

Page: 111 / 156

Ch.5 Web Maintenance Mode
< 109 >
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
5-3-3 PREVIOUS PRINT <PRINT SETUP>
DRYPRO 793 stores the printed data in its HDD, and allows to reprint the same data that
has been printed.
Item Descriptions
Select Device Select the diagnostic device whose print data should be printed, from the pull-down menu,.
Job List Displays the jobs registered in the diagnostic device selected in "Select Device".
Select the job and tick the check box in the left of the job that should be reprinted.
Clicking the [Disp] button will display the printed image of the job that is selected by check.
Clicking the [Mark] button will register the displayed image as an image that will be displayed
on the "LUT Setup" screen.
Clicking the [Close Image] button will return to the "Reprint" screen after closing the "Reprint
Image" screen.
QUEUES Displays the job count registered on the diagnostic device selected in the "Device Select".
PAGE SEARCH Search the image that should be reprinted from the "Page No." printed on the film edge.
COPY COUNT Sets the copy count of the reprint.
[ACTION] button Registers the image in reprint job, which has been selected by ticking in the Job List.
[CANCEL] button Returns to the "Status" screen.
User Level
1 2 3
Disp
● ●
Ope
● ●
Maximum 50 of reprint
jobs can be redisteres
at a time.