Konica Minolta DRYPRO Model 793, Operation Manual

Page: 16 / 156

Ch.1 Safety Precautions & Warnings
< 14 >
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
Cautions for Usage
• Never open or close any covers other than the specified in this Operation Manual.
High voltage may be applied on some units in the device. If you touch them accidentally, you may
suffer burns or an electric shock.
• When replacing FILTER or removing film jams in the discharge unit, follow the procedure in
this Operation Manual;
otherwise, a fire may be caused.
• Plug the power cable completely.
If dust is accumulated on the power plug, or the power cable is not plugged properly, this may
cause an electric shock or a fire.
• Be sure to use the power cable supplied with this device. Do not use an extension cord or
do not connect another device to the same wall outlet;
otherwise, a fire or heating may be caused.
• Be careful not to trip over the power cable to damage it.
If you continue using the damaged power cable, this may cause an electric shock or fire.
• Do not block the air inlet or the air outlet of this device;
otherwise, a breakdown may be caused.
• Do not start up or shut off the device by plugging or unplugging the power cable;
otherwise, an electric shock or breakdown may be caused.
• If it is likely that lightning may occur, stop operating the device, and unplug the power
cable.
A breakdown may occur depending on the degree of lightning.
• Do not use this device for any purpose other than printing image data;
otherwise, a breakdown may be caused.
• Do not operate the switches with wet hands;
otherwise, you may suffer an electric shock.
• When unplugging the power cable, do not pull it;
otherwise, the inner cable may be broken, and this may cause heating or a fire.
• Do not let this device exposed to water by cleaning the device with a wet cloth or placing
the vase containing water on the device, etc;
otherwise, you may suffer an electric shock due to a leakage of currents.
• Before you clean the device, be sure to stop operating it, and unplug the power cable or turn
the breaker OFF;
otherwise, you may suffer injury or the device may be broken down as the fan rotates at the high
speed in the device.
• If the device is not going to be used for an extended period of time, unplug the power cable
for safety purpose;
otherwise, dust may be accumulated, resulting in heating or a fire.
• When the failure occurs on the device, contact your Technical Representative.
NEVER use the troubled device as it is dangerous.
Note that a laser tube is incorporated in this device, and direct exposure of eye or skin to the laser
beam may result in injury. Also the device contains an assembly using a high voltage. Due case
should be taken not to suffer from electrocution by touching this assembly.
WARNING
NOTE : If the contents of this page are not legible, order a new manual.