Konica Minolta DRYPRO Model 793, Operation Manual

Page: 60 / 156

Ch.4 Maintenance Mode
< 58 >
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
7
7
Touch the [PRINT] button.
- Registers the print job for previous print, and returns to
the "Maintenance Mode (PRINT SETUP)" screen.
- Touching the [NO] button returns to the "Maintenance
Mode (PRINT SETUP)" screen without previous print-
ing.
Searching the Print Data from the Page No..
When it is difficult to locate the desired print data by scrolling with the arrow
[
▲
], [
▼
] buttons due to too many of these data in the list, use the [Search]
button to locate the desired print data quickly. How to use the [Search] but-
ton to locate the print data is detailed below.
1
Display the "PREVIOUS PRINT" screen follow-
ing the step 1 ~ 5 of the "4.4.2 Reprint"
2
2
Touch the [Numeric] button in the "PAGE
SEARCH" column.
- "INPUT VALUE" screen will be displayed.
3
Input the "Page No." printed on the edge of the
film that should be reprinted.
INPUT VALUE
Buttons displayed on the screen with which
numericals are input have following meanings.
[<] key
: Cursor moves to the left by one
space.
[>] key : Cursor moves to right by one
space.
[BS] key : Delete one character in the
adjacent left of the cursor.
[Delete] key: Delete one character in the
adjacent right of the cursor.
Reprint will be initiated upon termination of the Maintenance Mode.
Reprint can be made
searching the image
from maximum 999
pages.