Konica Minolta DRYPRO Model 793, Operation Manual

Page: 31 / 156

Ch.3 Operation
< 29 >
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
4) Status Info : Displays the current status of the DRYPRO 793.
When Lis-793 or Supply 3 Tray is equipped on the main unit, each illustration will be
displayed, and the cover position is displayed when it is open.
5) [Start Timer] Button : Touch this button to set the start timer. this button will not be
displayed when "OFF" is set for all days of the week.
6) [Menu] Button : Switches between the Menu Mode and Maintenance Mode, where
Menu Mode enables to check the job currently in printing and to check various set-
tings of the DRYPRO 793, while the Maintenance Mode to alter the settings and to
perform check and maintenance.
7) Warmup Progress Bar : In the warmup process, it indicates the remaining time
before it reaches the Ready status. One scale corresponds to approx. two minute.
8) [Error Reset] Button : Appears when an error occurs.
Touching this button initiates the reset sequence of the DRYPRO 793.
9) [Filter Change] Button : Appears when it comes close to the date when the filter
should be replaced. Touching this button displays the "Filter Change" screen.
10) [Regular Mainte] Button : Appears when it comes close to the date when the regu-
lar maintenance should be performed. Touching this button displays the "Regular
Mainte. Item List" screen.
11) [BEEP STOP] button : When "INTERVAL" is selected for "ERROR ALARM SET-
TING" of "Touch Panel Setting" of the Maintenance Mode, this button appears upon
occurrence of error or film empty. Buzzer keeps going intermittently until this button is
pressed.
12) [Dust Cleaning] Button : Appears when the cleaning roller needs cleaning. Touch-
ing this button displays the "Dust Cleaning" screen.
13) Film Jam Location Info : When a film jam occurs, location of the stuck film is dis-
played. Touching the [Error Reset] button displays "Jam Release" screen.
p.86 TOUCH
PANEL
p.82 Start Timer
p.142 Replacement
of Deodorant
Filter
p.47 Maintenance
Mode
p.126 Error Reset
p.30 Startup
p.147 Display and
Check of the
Maintenance
& Inspection
p.95 Dust
Cleaning
p.128 Resolving
the Film Jam
Above 7) through 13) appears only when they are necessary. They disappear
when they become unnecessary.