Konica Minolta DRYPRO Model 793, Operation Manual

Page: 115 / 156

Ch.5 Web Maintenance Mode
< 113 >
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
5-3-6 LUT SETUP <PRINT SETUP>
DRYPRO 793 incorporates a library of LUTs recommended for each diagnostic device.
Assigning the LUT registered in the library to each channel in advance instantly allows to
apply that LUT to the diagnostic device.
Item Description
LUT NO. Select the LUT for the setup of print condition.
Select from "1" - "7".
LUT NAME Input the LUT name with maximum 16 characters.
LIBRARY Displays the list of LUT and "PREVIOUS SETTING".
Selecting a specific LUT library will display that library on the screen.LUT
Selecting the "PREVIOUS SETTING" will restore the status before the setting is applied by
touching the [DECISION].
[U-D-R-L] button Shifts the LUT curve displayed on the screen.
[U] button : Shift the LUT curve upward.
[D] button : Shift the LUT curve downward.
[R] button : Shift the LUT curve to the right.
[L] button : Shift the LUT curve to the left.
LUT Curve Adjusts the LUT curve by drugging the points on the curve.
LUT Value Adjusts the LUT curve by inputting the numerical values.
[DECISION] button Reflect the input for the LUT value to the LUT curve.
The LUT curve after the change is displayed in black, while that before the change is in red.
[CONVERT] button Switches the input unit for the LUT value between the density (x100) and digital value (0 ~
4096).
[SMPTE] button Switches the required points that should be input as the LUT value between 16 points and 13
points (corresponds to SMPTE 0% - 100%, 13 steps)
[SMOOTH] button Converts the LUT curve smoother.
[LINEAR] button Convert the LUT curve to linear.
User Level
1 2 3
Disp
● ● ●
Ope
●