Konica Minolta DRYPRO Model 793, Operation Manual

Page: 36 / 156

Ch.3 Operation
< 34 >
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
2
Press the [Operation] button for approx.
1 second.
- A message shown in the left will be displayed on the
Operation Panel.
- After the message is kept displayed for 30 to 60 sec,
the DRYPRO 793 shuts down. In the meantime, the
Operation Lamp on the Operation Panel is kept blink-
ing during
2. Shutdown without using the start timer
How to manually start up the DRYPRO 793 without using the start timer is detailed below.
p.82 Start Timer
Do not move or apply shock to the DRYPRO 793 for a while even after the power is
turned OFF. Otherwise it may cause damage to the device.
1
Confirm that "Printing" is not displayed on the
Operation Panel.
The power can be turned OFF even when the DRYPRO 793 is in printing operation
or in the status that the print job is registered. The job that is not printed at this time
will be printed next time the DRYPRO 793 is started up.
2
When the shutdown was not made correctly last time, the DRYPRO 793 may not start
up even when the [Operation] button is pressed. If such occurs, first of all, turn OFF the
power breaker located on the bottom of the main body's right cover, and press the
[Operation] button after waiting for a few seconds to start up the DRYPRO 793.
Each fan continues
operation in order to
cool inside of the unit
for about 1 hour.