Konica Minolta DRYPRO Model 793, Operation Manual

Page: 93 / 156

Ch.4 Maintenance Mode
< 91 >
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
7
Touch the arrow [
t
], [
s
] buttons to select the
"TEST PRINT BIN".
- Touching the arrow [
t
], [
s
] buttons will switch between
"TOP" and "BOTTOM".
7
8
Touch the arrow [
t
], [
s
] buttons to select the
"JAM FILM BIN".
- Touching the arrow [
t
], [
s
] buttons will switch between
"TOP" and "BOTTOM".
8
The test print for which the bin is specified in "Test Print Bin" means "SMPTE
Pattern (including mammo)" and "Calibration Sheet".
9
Touch the arrow [
t
], [
s
] buttons to select the
"SMALL SIZE FILM BIN".
- Touching the arrow [
t
], [
s
] buttons will switch among
"TOP", "BOTTOM" and "DICOM/P-CON" (follows the
setup made on the input device or DRYPRO 793).
9
10
Touch the [SAVE] button.
- Returns to the "Maintenance Mode (Other Setup)"
screen after saving the settings.
10