Konica Minolta DRYPRO Model 793, Operation Manual

Page: 70 / 156

Ch.4 Maintenance Mode
< 68 >
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
4-4-7 PRINT CONDITION <PRINT SETUP>
Allows to assign a default print condition to each diagnostic device for the case that the print condi-
tion is not designated by the diagnostic device.
Items that can be set in this default print condition are as follows.
Page Item Default Descriptions
LUT SELECT 1 Select the LUT for the print condition.
Select from "1" - "7".
Use "LUT Setup" of the Maintenance Mode to set the details of LUT.
DENSITY 0 Sets the density of the image. Select from "-7" - "+7". More negative,
lighter the density, more plus, darker.
CONTRAST 0 Sets the contrast (contrast between light and dark of the image) of the
image.Select from "-7" - "+7"
1/3 More negative, lower the contrast, more plus, higher.
SMOOTH 2 Sets the smoothing of the image. Select from "0"~"7".
In the range of "0"~"6", larger the value, smoother the image.
However, too large in value makes the image blur.
Selecting "7" gives the same smoothing result as "0" is selected.
However magnification of the image is fixed at 100%.
Recommended is"2" or "3".
DENSITY MAX CH1, 2 : 300 Sets the max. density of the printed image. Set between "150" ~ "400".
Ch3 : 400 Higher the value, higher the max. density. Lower the value, lower the
CH4 - : 300 max. density.
DENSITY MIN 20 Sets the min. density of the printed image. Set between "10" ~ "30".
Higher the value, higher the min. density. Lower the value, lower the
min. density.
2/3
ILLUMINATION 2000 Sets the luminance of the light table. Normally, this value is specified
and sent from the diagnostic device.
Set between "0" ~ "38000".
AMBIENT LIGHT 10 Sets the ambient light. Normally, this value is specified and sent from
the diagnostic device.
Set between "0" ~ "38000".
FLIP OFF Selects whether to flip the print image. Select from OFF (not reversed)
or ON (reversed).
Selecting "ON(reversed)" will print the image laterally reversed.
SORTER BIN 1 Selects the bin to which the film is discharged when the sorter is in
use. Select from "1" ~ "6". Bin No.. is linked to that set by "Sorter
Setup (other settings)".
FILM ORIENTATION Portrait Sets the orientation of the film to be printed. Select from Portrait (long
edge to horizontal) or Landscape (long edge to vertical)
3/3 POLARITY Pos Selects between Neg and Pos of printed film.
BORDER Black Selects the border color. Choices are black or transparent.
TRIM CH1, 2 : OFF Selects whether to print the trim. (ON/OFF)
CH3 : ON
CH4 - : OFF
Both "Luminance" and "Ambient Reflection" influence the image quality.
Therefore, do not manipulate these settings in normal operation.
User Level
1 2 3
Disp
● ● ●
Ope
●