Konica Minolta CM-M6, Instruction Manual

Page: 97 / 128

94
3
En
vir
onment Set
tings/Other Set
tings
„
Buzzer
Operation sounds can be set to ON or OFF.
Memo
The buzzer is set to “ON” under the initial settings.
Operating Procedure Start the procedure from the <Setting> - <Instrument setup> screen.
1
Use [

] or [

] to move the cursor to “Beep”, and
then press the [Confirmation] key.
The <Beep> setting screen is displayed.
2
Use [

] or [

] to move the cursor to ON or OFF.
Settings
„ {
OFF
„ {
ON (Standard)
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
<Instrument setup> screen .
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the <Instrument setup> screen.
Sample
0002 TARGET-2
Instrument setup
Setting
Brightness
Measurement button
ON
Beep
ON
3
Direction
Sample
Setting
Brightness
Beep
ON
3
Direction
0002 TARGET-2
Instrument setup
Beep
OFF
ON