Konica Minolta CM-M6, Instruction Manual

Page: 86 / 128

83
2
Use [

] or [

] to move the cursor to the item to be
set, and then press the [Confirmation] key.
The <Parametric coef.> edit screen is displayed.
3
Use [

] or [

] to move the cursor to the item to set
and press the [Confirmation] key to change the
item.
• Pressing the [Confirmation] key causes the cursor to
appear on the value. Press [

] or [

] to change the
value. Move the cursor between the digits of the value by
pressing
[  ] or [  ]
.
Settings
„ {
0.01 to 30.00
• Press the [Confirmation] key to confirm every time the
setting of an item is changed.
4
After all settings have been configured, use [

] or
[

] to move the cursor to “OK”, and then press the
[Confirmation] key.
The setting is confirmed and the screen returns to the
<Parametric coef.> screen
.
Notes
If [ESC] is pressed during setup, the settings will not be
changed and the screen will return to the <Parametric
coef.> screen.
5
Press [ESC] to return to the <Default data setup>
screen.
Sample
0002 TARGET-2
Default data setup
Default tolerance
Parametric coef.
80%
Warning level
Setting
Parametric coef.
25°
l (CMC):
1.00
c (CMC):
1.00
OK Cancel
Sample
0002 TARGET-2
Default data setup
Default tolerance
Parametric coef.
80%
Warning level
Setting
Parametric coef.
25°
l (CMC):
1.00
c (CMC):
1.50
OK Cancel