Konica Minolta CM-M6, Instruction Manual

Page: 92 / 128

89
„
Display Language Settings
This instrument allows the display language to be set.
Memo
• The language is set to “English” under the initial settings.
• The language selection screen can also be displayed by turning ON the instrument while holding down [MENU].
Notes
When the backup battery of the instrument has gone dead, the display language is reset to “English”.
Operating Procedure Start the procedure from the <Setting> - <Instrument setup> screen.
1
Use [

] or [

] to move the cursor to “Language”,
and then press the [Confirmation] key.
The <Language> screen
is displayed.
The scroll bar at the right on the
<Language> screen
shows that there are additional language settings that
cannot fit on the screen.
2
Use [  ] or [  ] to move the cursor to the desired
language.
Moving the cursor past the top or bottom of the list will
show additional language settings that cannot fit on the
screen.
Settings
„ {
English : English
„ {
日本語
: Japanese
„ {
Deutsch : German
„ {
Français : French
„ {
Español : Spanish
„ {
Italiano : Italian
„ {
中文
: Chinese
„ {
Português : Portuguese
„ {
Polski : Polish
„ {
Pусский язык
: Russian
„ {
Türkçe : Turkish
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
<Instrument setup> screen .
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the <Instrument setup> screen.
Sample
Setting
0002 TARGET-2
Instrument setup
User type
Administrator
Language
English
Date format
yyyy/mm/dd
Date & time
2016/08/25
Sample
Setting
0002 TARGET-2
Instrument setup
User type
Administrator
Language
English
Date format
yyyy/mm/dd
Date & time
2016/08/25
Language
English
日本語
Deutsch
Français
Español
Italiano
中文
Português
Polski
Русский язык
Türkçe