91
Setting the Clock
This instrument has a built-in clock to record the date and time of measurement. Because the date and time have
been set under the initial settings, there is no need to change these settings under normal conditions. If necessary,
however, the date and time settings may be configured.
Operating Procedure
Start the procedure from the <Setting> - <Instrument setup> screen.
1
Use [
] or [
] to move the cursor to “Date & time”,
and then press the [Confirmation] key.
The <Date & time> setting screen
is displayed.
2
Use [
]/[
] or [
]/[
] to move the cursor to the
item to be set, and then press the [Confirmation]
key.
The cursor color turns to blue and
and
are displayed
above and below the cursor.
3
Use [
] or [
] to change the value.
Settings
{
Year
: 2000–2099
{
Month
: 1 to 12
{
Day
: 1 to 28, 29, 30 and 31 (varies with selected
month/year)
{
Hour
: 0 to 23
{
Minute : 0 to 59
•
The value increases/decreases by one with each button
press.
•
Holding down
[
] or [
]
increases/decreases the value
by one continuously.
4
Press the [Confirmation] key.
The setting is confirmed.
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed.
5
Repeat steps 2 to 4 for each of the date (Year/
Month/Day) and time (Hour : Minute) parameters.
6
After all settings have been configured, use [
] or
[
] to move the cursor to “OK”, and then press the
[Confirmation] key.
The selection is confirmed and the screen returns to the
<Instrument setup> screen.
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the <Instrument setup> screen.
Sample
Setting
0002 TARGET-2
Instrument setup
User type
Administrator
Language
English
Date format
yyyy/mm/dd
Date & time
2016/08/25
Sample
Setting
0002 TARGET-2
Instrument setup
User type
Administrator
Language
English
Date format
yyyy/mm/dd
Date & time
2016/08/25
Date & time
OK
09
:
12
25
08
/
/
2016
Cancel
Summary of Contents for CM-M6
