Konica Minolta CM-M6, Instruction Manual

Page: 59 / 128

56
3
En
vir
onment Set
tings/Other Set
tings
„
Warning Level Setting
Warnings are displayed when measurement data nears the tolerance. Users can set how close to the tolerance the
data must be before a warning occurs.
Operating Procedure Start the procedure from the <Target menu> - <Pass/Fail> screen.
1
Use [

] or [

] to move the cursor to “Warning
level”, and then press the [Confirmation] key.
The <Warning level> screen is displayed.
2
Use [  ] or [  ] to change the value.
Settings
„ {
000 to 100%
3
Press the [Confirmation] key after completing the
changes.
The setting is confirmed and the screen returns to the
<Pass/Fail> screen .
Notes
If [ESC] is pressed during configuration, the settings will
not be changed and the screen will return to the <Pass/
Fail> screen.
Target menu [0002]
Pass/Fail
Target
Edit tolerance
Parametric coef.
Warning level
80%
Target menu [0002]
Pass/Fail
Target
Edit tolerance
Parametric coef.
Warning level
80%
0 8 0
%
Fail
Pass
Warning level