Konica Minolta CM-M6, Instruction Manual

Page: 74 / 128

71
Manual Average Option
Select the save method when performing manual averaging.
Operating Procedure Start the procedure from the <Measurement cond.> - <Measurement setup> screen.
1
Use [

] or [

] to move the cursor to “Manual
average option”, and then press the [Confirmation]
key.
The <Manual average option> screen is displayed.
2
Use [

] or [

] to move the cursor to “Manual save”
or “Auto save”, and then press the [Confirmation]
key.
Selections
{
Manual save
{
Auto save
3
Press the [Confirmation] key to confirm, and then
press [ESC].
Notes
The selection is confirmed and the screen returns to the
previous screen.
Tilt Detection
This instrument features a warning function that alerts users if the instrument is tilted beyond the measurement
range.
Turning this function ON will cause a warning to appear if the instrument is tilted at an angle that cannot be
corrected.
Memo
Tilt detection is set to “ON” under the initial settings.
Operating Procedure Start the procedure from the <Measurement cond.> - <Measurement setup> screen.
1
Use [

] or [

] to move the cursor to “Tilt
detection”, and then press the [Confirmation] key.
The <Tilt detection> screen
is displayed.
Sample
Measurement cond.
Measurement setup
Measurement angle
Manual average option
Manual save
Manual average
Auto average
Manual average option
Manual save
Auto save
Sample
Measurement cond.
Measurement setup
Tilt detection
OFF